FCC and CE Compliance:
Sd-25s w/DMX
which are revision 1.6 or later have been tested to comply
with FCC and CE requirements. Revisions earlier than this may have
passed testing, but were not certified at the time of manufacture.
Because
Sd-25s w/DMX
are low voltage DC devices, neither UL or CE
require safety testing.
For fireproofing or additional radio frequency interference shielding,
Sd-25s
w/DMX
can be mounted in a fire rated metallic case. Typically, this would
be a NEMA-rated electrical enclosure or 19” electrical rack.
FCC Instruction to User:
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radi-
ate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B
computing device, pursuant to FCC Rules. In order to maintain compliance
with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception. The user is cautioned that
changes and modifications made to the equipment without the approval of
manufacturer could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This device
may not cause harmful interference and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte
toutes les exigences du Reglement sur le
materiel brouilleur du Canada.
EC DECLARATION OF CONFORMITY
Thursday, September 4, 2014
Application of Council Directives:
EMC Directive, 89/336/EEC
Manufacturer's Name:
Gilderfluke & Co., Inc.
Manufacturer’s Address:
205 South Flower St., Burbank, California 91502 USA
Importer’s Name:
Importer’s Address:
Type of Equipment:
Professional Audio
Equipment Class:
Commercial and Light Industrial
Model:
Sd-25 w/DMX
Conforms to the following Standards:
EN 55103-1: 1996 and EN 55103-2: 1996
Year of Manufacture:
2006
I the undersigned, hereby declare that the equipment specified above conforms to the above directive(s) and standard(s).
Place:
Burbank, California
Signature:
(signed)
Date: August 1, 2006
Full Name:
Doug Mobley
Position:
CEO
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Sd-25 w/DMX Manual • page 31 of 32 • © September 4, 2014 • Gilderfluke & Co. • DCM
