DE
1
Instruction manual
The Gildewerk Junior is available in
the following configurations:
DMJ-0002F
Gildewerk Junior Dipping set
DMJ-0002B
Gildewerk Junior Colouring set
DMJ-0002E
Gildewerk Junior Duo set
DMJ-00008
Gildewerk Junior Base
This manual applies to all the above
configurations.
Product description
(All models)
Aluminium canisters are not suitable
for the processing of products that
contain stearine, such as marble wax,
moulding mix, etc.
The
Gildewerk Junior Dipping Set
is intended for use in the dipping
of candles. This set consists of
the following components:
• Junior Base urn
• Dipping canister
• Dipping canister lid
• Condensing ring for dipping
canister
The
Gildewerk Junior Colouring
Set
is intended for use in the
colouring of candles. This set consists
of the following components:
• Junior Base urn
• 5 Colour canisters
• 5 Synthetic canister lids
• Condensing ring with 5 spaces
for the colour canisters
The
Gildewerk Junior Duo Set
has larger canisters than the Junior
Colouring Set, allowing you to colour
thicker candles using the Duo.
This also makes it ideal for colouring
carved candles. It is also possible
to dip candles in the Duo. The set
consists of the following components:
• Junior Base urn
• 2 Dipping/colour canisters
• 2 Lids for dipping/colour canisters
• Condensation ring for dipping/
colour canisters
Most components are individually
available.
The Gildewerk Junior Base without
dipping- or colour canisters consists
of:
• Junior urn with element,
thermostat, safety cut-out and
cord.
The Gildewerk Junior urn heats wax
according to the safe ‘au bain marie’
method, which uses water. As
a result, the wax can never exceed
a temperature of 100 °C. The urn
is made of double-sided enamelled
sheet steel, while the lower casing is
made of an impact-resistant synthetic
material. The Junior is fitted with
a 1800 Watt/230-240 Volt element.
Its temperature is regulated by
a thermostat which is connected to
an indicator lamp. A cut-out switch
prevents overheating.
The Junior is equipped with an
insu lating coat made of heat-resistant
foam. The insulating coat keeps
the urn’s contents at the right
temperature for longer, reduces
the urn’s energy consumption by
+/- 35 % and increases the lifetime
of the thermostat. In addition,
the exterior of the urn is cooler to
the touch.
Installation
(all models)
1. Place the Junior in the desired
position without its accessories.
2. Fill the urn with approximately
15 cm of hot or cold water.
3. Place the aluminium condensation
lid on the urn.
4. Turn the thermostat dial to
the zero position and insert
the plug into an earthed socket
with an alternating current voltage
of at least 230/240 V and
a capacity of at least 10A.
5. The use of a timer is highly
recommended.
Please note!
• Only connect the machine to
an earthed 220-230 Volt socket
with a capacity of at least 10 A.
• Never turn on an empty urn.
Fill with water even when testing.
• Turn off the urn by removing
the plug from the socket.
©2010 Gildewerk NL
Subject to changes. The conditions held at
the county court in Haarlem apply to all services
and goods supplied by Gildewerk.
Read this instruction manual
carefully before using the
equipment. If you have any
questions, please contact
Gildewerk.
Gildewerk
Junior
GW1003HL-03
Gildewerk Junior
Dipping
set
Gildewerk Junior
Colouring
set
Gildewerk Junior Duo Set
www.gildewerk.com
T
he Netherlands
Gildewerk B.V.
A. Hofmansweg 41
NL-2031 BH Haarlem
T 31–(0)23 –532 22 55
F 31–(0)23 –534 09 65
E holland@gildewerk.com
