5
4
1. Place the bowl on the body and turn it clockwise so that it fits securely.
See Fig. 1
2. Fit the carameliser onto the drive spindle. Make sure that the carameliser is
correctly positioned on the pins of the drive spindle as shown in the illustration.
The carameliser is correctly fitted when there is a gap of 5 to 8 mm between the
carameliser and the metal housing. See Fig. 2
3. Place the splashguard onto the bowl. See Fig. 3
ENSURE THAT ALL THE HOOKS ON THE SPLASHGUARD HAVE SNAPPED
INTO POSITION ON THE BOWL.
FIG. 3
