CONNECTION TO
THE MAINS
Please check that the voltage indicated on the product corresponds with your supply voltage.
IMPORTANT
As the colours in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as follows:
The wires in the mains lead are coloured in
accordance with the following code:
Blue Neutral (N)
Brown Live (L)
Green/Yellow Earth ( )
FOR UK
USE ONLY
- Plug fitting details
(where applicable).
The wire coloured BLUE is the NEUTRAL and must be connected to the terminal
marked N or coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal
marked L or coloured RED.
The wire coloured GREEN/YELLOW must be connected to the terminal marked with the
letter E or marked .
On no account must either the BROWN or the BLUE wire be connected to the EARTH
terminal ( ).
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and conforming to
BS 1362 and be ASTA approved.
If in doubt consult a qualified electrician who will be pleased to do this for you.
NON-REWIREABLE
MAINS PLUG
If your appliance is supplied with a non-rewireable plug fitted to the mains lead and
should the fuse need replacing, you must use an ASTA approved one (conforming to
BS 1362 of the same rating).
If in doubt, consult a qualified electrician who will be pleased to do this for you.
If you need to remove the plug -
DISCONNECT IT FROM THE MAINS
and then
cut it off the mains lead and immediately dispose of it safely. Never attempt to
reuse the plug or insert it into a socket outlet as there is a danger of an
electric shock.
