46
Model: GGF-400, GGF-720
Fryer Operation
5.1.6.2 COOL Mode
5.1.6.3 AUTO-COOL Feature
5.1.6.4 BOIL OUT Mode
IMPORTANT!
Fryer must be properly drained, rinsed and prepared for cooking after a Boil Out cycle. See
Section
6, Cleaning
.
Pressing the
BOIL
key while Controller is in
PREHEAT
state enters
BOIL OUT Mode
.
Temperature and time change to the
BOIL TEMP
and
BOIL OUT TIME
, respectively, as
specified in
USER SETTINGS (see Section 5.1.7)
.
Factory-Default Setting:
BOIL TEMP = 200°F
... editable in the range of 185° to 208°F.
BOIL OUT TIME = 30 minutes ...
editable in the range of 1 to 45 mins.
To exit
COOL MODE
press the
[CLEAR]
key, then press
[<4]
to exit
- OR -
Press
[CLEAR]
again to continue with
COOL
Mode.
Upon exit, the temperature setpoint will return to the previous active value and
fryer will enter
PREHEAT
until temperature is reached.
+
COOL MODE
is an energy-saving feature that changes oil temperature setpoint to a lower
valve. Places Fryer into an idle standby state during periods of inactivity.
Enter
COOL MODE
by pressing the
[COOL]
key. The temperature setpoint changes to the
COOL TEMP
setting specified in
User Settings
,
see
Section 5.1.7, Edit User Settings
.
Factory-set default = 275°F
. The setting can be edited in the range
200°F to 350°F
.
Exit
AUTO-COOL
same as
COOL
...
press the
[CLEAR]
key, then press
[<4]
to exit
- OR -
Press
[CLEAR]
again to continue
COOL
Mode.
Upon exit, the temperature setpoint will return to the previous active value and
fryer will enter
PREHEAT
mode until temperature is reached.
+
When the
AUTO-COOL
feature is turned
[ON]
, fryer automatically enters
COOL MODE
if
no cook cycles are started
within the amount of time specified by the
[AUTOCOOL TIME]
setting in
User Settings
, s
ee
Section 5.01.7, Edit
User Settings.
Factory-default: [AUTOCOOL] = OFF ... [AUTOCOOL TIME] = 30. TIME
setting can be edited in range of
1 to 510
mins.
Summary of Contents for GGF Series
