6
OPERATION AND MAINTENANCE
Safety
In order to guarantee the safety of the users at all times, it is abso-
lutely necessary that the swing door installation be checked by a
competent specialist, prior to the first commissioning and at least
once a year during the operation, with regard to its safe operating
condition! The result of the check-up must be documented in the
control booklet.
Should any malfunctions occur which are detrimental to the safety
of the door users, the mains supply must be disconnected. A manual
operation of the door is still possible. The drive unit may only be
taken back into operation after the malfunction has been repaired
by a specialist and all risks have been eliminated!
Transparents door wings (or their surfaces) must be clearly reco-
gnizable, e.g. by means of a permanent marking or dyed materials.
Care and checking to be carried out by the operator
Before carrying out any work on the swing door drive unit, make sure
that the mains power supply has been disconnected. The drive unit
covering must not be removed!
Never use running water or high-pressure machines for cleaning
the area of the drive unit! Do not use any abrasive or chemical
products for cleaning the installation!
Checking and maintenance to be carried out by the after-sales
service
Prior to the first commissioning, and at least once a year during
normal operation, the safe operating condition of the installation
must be checked by an authorized specialist!
We recommend to conclude a maintenance contract with the manu-
facturer respectively with his authorized distribution partner.
The checking and maintenance work must be performed according to the checklist
contained in the control booklet FDC-B France. The correct execution must be con-
firmed by the after-sales service technician who enters the date and his signature in
the control booklet.
