7
5.4 Re-separate the backrest and the base
Simply follow the steps in the opposite order of 5.3
5.5 Adjust the armrest
1 Raise the armrest at 90 degree angle
2 place the baby in the seat
3 Put the armrest flat
1
2
3
6. Installation
6.1 installed in the forward facing position with ISOFIX system
With the cut-out facing onto the two ISOFIX attachment points of your vehicle
NOTE:
The ISOFIX attachment points are located between the surface and the
backrest of the vehicle seat.
Press the ISOFIX adjuster to pull out both locking arms, from the under of base
pull the locking arm to and from until you hear an audible CLICK which indicate
they are fully engaged. And on both sides of the locking arms, the button turn
into green safety color.
Instruction
EN
EN