Gill Instruments Ltd
Intrinsically Safe WindObserver Anemometer
Page 5
Issue 10
Doc. No. 1360-PS-0001
May 2015
1.
FOREWORD
Thank you for purchasing the Gill Instruments Limited Intrinsically Safe WindObserver
ultrasonic anemometer system.
The Anemometer has no customer serviceable parts and requires no calibration or
maintenance.
To achieve optimum performance we recommend that you read the whole of this manual
before proceeding with use. Do
NOT
remove the Anemometer black “rubber” transducer
caps.
Gill products are in continuous development and therefore specifications may be subject
to change and design improvements without prior notice.
The information contained in this manual remains the property of Gill Instruments and
must not be copied or reproduced for commercial gain.
Modifications to the Intrinsically Safe WindObserver Anemometer or associated
Power Supply unit will invalidate the Approval Certificates and Warranty.
2.
INTRODUCTION
The Gill Intrinsically Safe WindObserver is a very robust unit with no moving parts,
outputting wind speed and direction. The units of wind speed, output rate and formats are
all user selectable.
The Intrinsically Safe WindObserver can be used in conjunction with a PC, data logger or
other device, provided it is compatible with the Power Supply Unit Box which provides
the RS232 or RS422 output.
The RS422 Output of the Power Supply Unit Box is designed to connect directly to the
Gill WindDisplay unit to provide a complete wind speed direction system.
The Anemometer output message format can be configured in Polar, UV (2-axis), NMEA
(0183 Version 3), tunnel or Binary and as either a Continuous output or Polled (requested
by host system), detailed in full in Para 8.1 Digital Serial Output Formats
.
3.
IS SYSTEM PACKING LIST
3.1
Gill Part 1360-PK-022
Comprising of:-
1360-PK-052
Intrinsically Safe WindObserver 2 axis anemometer.
1255-10-057
Anemometer Mounting kit.
1360-PK-054
Anemometer 20 Way Connector kit.
1000-10-034
This manual on a CD.
1277-30-045
Head Cover (2 halves).
1360-PK-053
Intrinsically Safe Power Supply Unit (and Communications
Interface). Mains Power Supply.
1360-10-008
3 Metre Anemometer Test Cable.
