Operation
MetPak Base Station User Manual
Last Change
©
Gill Instruments Ltd
22 April, 2013
Page 29
3.2.4
MetView Console Display Options
MetView Console buttons can convert data from the MetPak Base Station to read
different units or scale settings. This does not alter the actual MetPak Base Station
configuration.
Units shown in
bold
denote default settings
Table 5
MetView scale and unit options
Gauge
Function
Wind Direction
Use buttons to choose from two display styles:
NSEW
or
Maritime
Wind Speed
Markers
Use buttons to add markers on the gauge for
Max/Min
or
Max Gust.
Wind Speed
Use buttons to choose from five wind speed units:
m/s
,
kph, mph, kts, fpm
Pressure
Use buttons to choose from pressure scales:
hPa
, mbar,
inHg, mmHg
Humidity
Displays Max and Min values during current session in
%
Temperature &
Dew Point
Use buttons to choose from three temperature scales:
°C
,
°F, K
Table 6
MetView averaging options
Setting
Function
Real Time
Choose this button for no averaging
2 Min
Select for 2 minute rolling average of all sensor readings
except DIG1
10Min
Select for 10 minute rolling average of all sensor readings
except DIG1
Table 7
Max/min markers
Setting
Function
Off
Maximum and Minimum Markers on all gauges turned off
On
Maximum and Minimum Markers on all gauges turned on
Reset
Reset all Gauge Maximum/Minimum Markers and all
digital Maximum/Minimum reading at will
Table 8
MetView Screen Settings Options
Setting
Function
Save Settings
Will Save all the current MetView screen settings to a file
for later retrieval if required.
Load Settings
Will load and update the MetView screen with a previously
saved setting.
Default Settings
Will return all MetView screen settings to factory default.
