Operation
MetPak Base Station User Manual
©
Gill Instruments Ltd
Last Change
Page 32
22 April, 2013
3.2.6
Data logging
NOTE.
MetView logs data based on the MetPak Base Station configuration not on
the MetView console settings.
To log MetPak Base Station data, click on the
Logging
button on the MetView
console. The
Logging
dialog box is displayed.
Figure 16
Setting up data logging
Setting up a logging file
1.
Select
Enable Logging
to start logging to a file.
2.
Identify the name and location for the logging file:
Log File location
Click on the
Browse
button to identify the folder
where you want to store the data file. Enter the name
of the file.
Log file header
if required type some notes on the data that is to be
recorded which will appear at the top of the saved
data log file.
3.
Choose from the following additional options:
Log File Rotation
Set up segmented logging with each logged file length
determined by the number entered in the text box
below. The figure 3600, for example, means that each
log file length will be 3600 lines of data. Maximum
entries per log file is limited to 65535 and a maximum
of 2048 log files can be created.
Add Timestamp
Adds the date and time to the logged data file taken
from the PC clock.
