Operation
MetPak Base Station User Manual
Last Change
©
Gill Instruments Ltd
22 April, 2013
Page 33
To start logging
1.
Check that the
Enable Logging
option is selected.
2.
Click on the
OK
button to commence logging and return to the console.
Note.
To show that data is being recorded, the Logging button’s icon changes to a
green tick:
Logging active
Logging stopped
To stop logging
To turn off logging:
1.
Click on the
Logging
button on the MetView console. Clear the
Enable
Logging
check box.
2.
Click on the
OK
button. If logging has stopped, the Logging button shows a
red background cross instead of the green background tick (see above).
