Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 100
Page 33
Issue 2
Doc. No. 1955-PS-001
March 2016
6.5.2
Exit/Reboot/Shutdown/Thru Mode/Logout
On the left hand side of the Configuration screen there are five buttons:-
Exit without saving
(and ) – Go back to GUI front screen without changing settings
but will still logged into configure screen. If you then click on Configure you will be taken
to the Configure tabs without having to login again.
Reboot MetStream
– An electrical power down of MetStream that will need a refresh of
the Web browser screen.
Shutdown MetStream
– Turns off power inside the MetStream box. This will require
MetStream to be powered up to view the web GUI again.
WARNING: This command will require the physical removal of the power from the
MetStream and the reapplication of power. MetStream cannot be restarted remotely
once this command has been issued.
Enable Thru Mode
– A mode to allow other software (e.g. a Terminal Programme) to
access the connected instrument to view or change its settings (see Para 6.5.11).
Logout
– Go back to the GUI screen this time if accessing Configure then a new login
will be required.
