Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 100
Page 51
Issue 2
Doc. No. 1955-PS-001
March 2016
If required re-open the MetStream Web page e.g. 10.10.10.153 to confirm that Thru Mode
has been enabled (see screen shot).
Close the Web Browser page connection.
Open a Telnet terminal programme e.g. HyperTerminal.
Type in a Name, e.g. MetStream Thru Mode.
Click on OK.
Select Connect Using from the drop down list to be TCP/IP.
Type in the Host Address (MetStream IP address) for example 10.10.10.153
Type in the Port Number which for MetStream will be 8023.
Click on OK.
