Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 105
Page 19
Issue 1
Doc. No. 1955-PS-001
April 2014
6.
METSTREAM GRAPHICAL USER INTERFACE
The MetStream 105 output can be viewed in a Graphical User Interface (GUI) by
connecting directly to a PC/Laptop or via a Wi Fi or Ethernet LAN connection and
opening a Web Page (Internet Explorer 9 or Mozilla Firefox 19.0.2 are recommended,
earlier versions may not be suitable). This then allows the user to view data and those with
password access to retrieve logged data and change GUI settings.
Parts required:-
MetStream 105 and Power Supply (supplied).
Ethernet 1 metre crossover cable (supplied).
Ethernet 2 Metre non crossover cable (supplied).
Gill MScan Software (supplied on the CD).
Computer preferably running Internet Explorer version IE9 (Chrome) or Mozilla
Firefox 19.0.2.
MetPak Range Unit or suitable connecting device.
Accessing the MetStream GUI using a PC and Ethernet
6.1
Crossover Cable.
First connect equipment as per the following system diagram.
Now apply power to the MetStream 105, wait for 90 seconds before attempting to access
it for data.
6.1.1
PC/Laptop Set Up using Gill MScan Software.
If the PC/laptop has a Wi Fi connection then temporarily disable this function to
connect to MetStream via a direct Ethernet crossover cable connection.
Note: - It is recommended to connect the MetPak or connected device to MetStream to
ensure correct configuration, however it is possible to set up MetStream parameters
without the connected device.
