Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 105
Page 25
Issue 1
Doc. No. 1955-PS-001
April 2014
Accessing the MetStream GUI with a PC and a Wi-Fi
6.3
Router
6.3.1
Using and Ethernet cable connection between MetStream 105 and a
Wi-Fi Router.
Note:- Alternative Wi-Fi connected devices may be used to connect to the MetStream unit
to view the GUI if required e.g. Tablet or Smart Phone however the Gill MScan Software
will only run on a PC to determine the IP address. Alternative IP Scan app software can
be used.
Connect MetStream to a Wi-Fi Router using the 2 metre Ethernet Cable supplied or any
standard non crossover Ethernet cable.
Now apply power to the MetStream 105, wait for 90 seconds before attempting to access
it for data.
If not already connected to the Wi Fi Router on the PC select:-
Start/
Select/
Control Panel/
Network and Sharing Center/
Select the appropriate Wi Fi Network and log on to the Wi Fi Network (the Wi Fi
password may be needed).
