Gill Instruments Limited
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetStream 105
Page 30
Issue 1
Doc. No. 1955-PS-001
April 2014
To automatically assign an IP address, check option A. To set a static IP address, check
option B. Option B requires the user to know what the routers subnet identity is and assign
an IP address accordingly (e.g. if the routers address is 192.168.1.1, then you may use
address 192.168.1.105 in box (C), as long as this does not conflict with another client
connected to the router). The subnet mask (D) value will again depend upon the router but
this value is more often than not able to be left at 255.255.255.0. The default gateway (E)
should be set to the routers IP address.
Once the MetStream has been set-up according to the user’s wishes, click save settings
(F).
The following screen will now be displayed:
Click 'OK' and the following screen will be displayed whilst the MetStream reboots:
