GILMAN gemini GSJ150, Manual

8

•  Periodically clean the rubber parts of the spinning rack on the strainer.

•  Thoroughly clean all parts immediately after use to maintain the performance of the 

  product.

•  Do not use harsh chemicals or abrasives to clean the parts of the juicer.

•  Never clean the parts in a dishwasher as 

this will damage the parts.

•  Rubber plug need to clean properly after use.

cleanIng

TroubleSHooTIng guIDe

Problem

Possible Cause

What To Do

No power to juicer.

Juicer is not plugged in. Check the j uicer is plugged in.
Incorrect assembly.

Re-assemble the j uicer as per 
the instructions. Ensure the lid 
is locked correctly.

The motor has stopped. There is a blockage in

the juicing jug.

Press the reverse button to 
clear the blockage.

The motor has cut out
due to over-use.

Switch off, unplug and allow 
to cool down for 30 minutes 
before using again.

Leaking underneath 
the j uicing j ug.

The rubber plug is not
correctly inserted.

Remove all parts and check
the position of the rubber plug.

Staining on parts.

This is the natural color
from juice.

This is normal. To reduce
discolouration, ensure you
rinse and clean the appliance
immediately after use.

Squeaking noise when
j uicing.

Friction between the
squeezing screw and
bowl or food.

The squeaking sound is
perfectly normal. Do not run
the juicer without any food.

Too much pulp coming
out with j uice.

There is excess food in
the bowl clogging the
strainer.

Cut food, especially fibrous
food into smaller pieces.