background image

15

3. Assembly of battery 

  1) Open the battery cover.

2)  Insert the 2 “AA” alkaline batteries according to the polarity label on battery cover. 

 

Attention: Do not reverse the battery. Insert the battery exactly following the label of "+" "-" on the battery cover.

3)  Close the battery cover.

Battery service life and replacement:

1)  When replacing the battery, make sure there is no medication or water in medication cup. If yes, please remove the 

medication cup first.

2)  When the orange indicator is light, the device can also work for a while, but it is recommended to replace the new batter-

ies.

3)  Usually two new “AA” alkaline batteries can work continuously 1 hour under normal working situations.

Attention:

Please do not mix batteries of different manufacturers or models, otherwise the battery life will be affected.

Remove the batteries if the device won't be used for long time.

4.2 Operations for treatment use

Preparations before use:

1.  Remove medication cup, please clean and disin-

fect it before use.

2. Infusion of medication: Open the cup lid, decant 

medication into medication cup, as shown on the 

right side:

Attention:

1)  Before using any pharmaceutical products or 

medicines, please consult your doctor to en-

sure that you are using the product correctly.

2)  Do not use medications having high concen-

trations, high viscosity, oily medicines, sus-

pended or volatile liquid medicine, doing so 

may lead to abnormal atomizing.

3)  It is recommended not to exceed the capacity 

of medication cup. If medication cup is filled 

with medication, be sure to cover the cup lid 

to  prevent  leakage.  Medication  in  the  cup 

should not be less than 2mL (The maximum 

capacity for the medication cup is 10mL).

3.  Close the cup lid.

Battery cover

Negative

Positive

ENGLISH

Cup lid

Infusion

Summary of Contents for 28066











Reviews: