16
CLEANING
Clean all the components of the nebulizer (except the air hose) before and after each use by choosing
one of the methods described below.
Method 1:
Thoroughly clean the components for 5 minutes by using hot drinking tap water (around
40°C – 104°F) and neutral soap.
Method 2:
Clean the components (except the air hose) by immersion in a solution of 60% of water and
40% of white vinegar. At the end of the operation, rinse with plenty of hot drinking water (around
40°C – 104°F).
At the end of the cleaning operations, rinse thoroughly by removing excess water and allow to air-dry
in a clean spot.
DO NOT BOIL OR AUTOCLAVE THE AIR HOSE AND THE MASKS.
DO NOT WASH THE ACCESSORIES IN THE DISH WASHER.
WASHING
Where diseases with risk of infection and microbial contamination are present, the end user shall carry
out the washing operations properly. The washing procedure can be performed only if the components
have been previously cleaned (see cleaning section).
For the washing procedure, the following operations shall be carried out:
- Fill a container of suitable size to hold every individual component with drinking water and disinfect-
ant (hypochlorite solution easily available in pharmacies) by complying with the proportions indicated
on the disinfectant packaging.
- The immersion time in the solution is indicated on the packaging of the hypochlorite solution accord-
ing to the concentration chosen for the preparation of the solution.
- Rinse with plenty of warm drinking water until removing any trace of solution, dry and store in a dry
and dust-free place.
- Dispose the solution used according to the instructions provided by the manufacturer of the disinfect-
ant.
SUPPLIED ACCESSORIES
ACCESSORIES
HI-FLO accessories kit
(HI-FLO ampoule, Adult Mask, Children Mask,
Air hose, Mouthpiece and Nosepiece)
1 – Air hose
2 – Ampoule lower part
3 – Nebulizer Nozzle
4 – Ampoule upper part
5 – Mouthpiece
6 – Adult Mask
7 – Children Mask
8 – Nosepiece (non-invasive)
Use only the original accessories intended and indicated by the Manufacturer.
NEBULIZER:
For each individual patient, it is recommended to use the nebulizer
for 6 months or up to 120 applications. The nebulizer shall be replaced after a long
period of inactivity, if it is deformed or broken or if the nozzle is clogged by a dry
medicine or medicine in powder form, etc.
Use the Nosepiece only if prescribed by the doctor. NEVER PUT the bifurcations into the nose but
place them as closely as possible.
7
6
8
5
1
3
4
2
ENGLISH
Summary of Contents for 28091
