Quickstart guide – Wi-Fi Connection
1. Installing App
For
iPad
and
iPhone
: search “
Mic-Fi
” in App Store to download an install
the app.
For
Android’s Smart-Phone
and
Tablet
: search “
Mic-Fi
” in Google Play
to download an install the app.
2. Switch ON the device
Hold the Power button, and the power indicator LED
will light, wait for ~20 seconds until the Wi-Fi
indicator and the illumination LEDs light, then the
Wi-Fi signal will be transmitting correctly.
3. Network Connection
Check the wireless connection on your Phone/Tablet
or PC and a list of available networks will appear.
Select the SSID “
WiFi2SCOPE_xxxxxx
” network from
the list to connect; the network “
WiFi2-
SCOPE_xxxxxx
” requires a password: enter the
password “
12345678
” and click Ok.
4. See the pictures
Once connected, please wait for about 5 seconds to
open the App to see your images. The Wi-Fi indicator
LED flashes and video stream signal should be
displayed in the App. Video streaming can be
broadcasted to many devices, but the frame rate of
live video will decrease as the number of receiving
devices increase.
The APP on iPad / iPhone and Android systems
Click on to display video. If the live video is black or slow, please restart
the App again.
WiFi Indicator
Snapshot
Power Indicator
Battery Indicator
Leds Switch
Power Button
Mic-Fi
Wi-Fi working:
Blue
Battery Status:
In Charging:
Orange
Low Level:
Red
Power ON:
Green
Using the buttons
Wi-Fi: Press the button for 2 seconds, the device will make available a
Wi-Fi network access (AP)
USB: Connect the USB cable to the microscope and the USB port on
your computer
Wi-Fi indicator (Blue LED): flashing light indicates the correct transmis-
sion of Wi-Fi line; continuous illumination indicates that there’s no
transmission
Power indicator (green LED): The LED lights up when the microscope is in Wi-Fi mode or when connected via Mini
USB cable to the PC or power supply.
Photos button: press the button to capture pictures directly from the microscope.
º
º
•
•
•
Navigation
icons
Capture Photo or Video
Photos folder or Videos folder
Calibration & Measurement
Switch between
photo and video
Resolution setting
Navigation
icons
Capture Photo
Photos folder
Calibration
& Measurement
Photo Archive
Resolution setting
•
•
•
•
•
Configurations and Instructions:
For Optical Microscopes
Microscope with a Step C thread : connect screwing the MICFIEYE to your optical microscope.
Microscopes with 23mm diameter eyepiece: screw MICFIEYE to MICFIEYE23* lens and insert in the microscope eyepie-
ce.
Microscopes with 30mm diameter eyepiece: screw MICFIEYE to MICFIEYE23* lens; enter the MICFIEYE30* adapter and
insert in the microscope eyepiece.
Microscopes with 30.5mm diameter eyepiece: screw MICFIEYE to MICFIEYE23* lens; enter the MICFIEYE30.5* adapter
and insert in the microscope eyepiece.
For Optical Endoscopes
Screw MICFIEYE to C coupler MICFIEYEF18* or MICFIEYEF1525* (according to the needs) and holding open the flaps of
the c-coupler, place the endoscope; rotate the zoom ring of c-coupler to obtain a clear image.
Depending on the magnifying lenses of which is provided the microscope or endoscope may be necessary to tighten the ring
MICFIEYERING* on your MICFIEYE.
*Items not included
