14.
fly the BOOM V2
Prior to your session, check the conditions (area,
environment, direction, gusts, gear, ...)
PREPARATION
Lay the kite out 90° to the wind. Fold over the
wingtip and secure it
On the trailing edge side of the kite, place the bar
far enough from all the bridle lines.
Make sure that the bridles are free of tangles and
that the pulleys aren’t jammed.
Connect and test your quick-release system.
Ensure that your flying lines are correctly connec-
ted and that you are clear of any potential risks.
Make sure there are no damages or knots.