GINNY’S BL-3326, Instruction Manual

   7

INSTALLATION & GROUNDING

 6

10

 6

    7

  INSTALLATION

  HOW TO OPERATE

 HOW TO OPERATE

                                                   CLEANING & CARE                                                                                                               Ginnys.com • 1.800.544.1590                                                    

Ginnys.com • 1.800.544.1590

1.    Fill the blender jar with ingredients according to the recipe 

       instructions.  Do not add ingredients past the maximum fill line

       (20 oz.)

2.    Attach the blade assembly to the blender jar by turning the blade

       assembly counter-clockwise until tightened securely on the

       blender jar.

3.    Turn the assembled jar over and place on the blender base by lining

       up the tabs.  Turn the blender jar clockwise until it locks and clicks

       into position on the blender base.      

4.    Plug the blender into a power supply.

5.    Press the switch button to turn on the blender.

6.    When blending is completed, turn OFF the blender and unplug from

       the power supply.

7.    Remove the blender jar and blade assembly from the blender base 

       by turning counter-clockwise.

8.    Carefully detach the blade assembly from the blender jar by turning

       counter-clockwise.

9.    Attach the jar cover to the blender jar by turning it clockwise.

10.  This can be served to enjoy directly from the blender jar, or poured

       and served.

IMPORTANT

•     Do not use hot liquids inside the blender jar or operate this

      blender when empty.      

•     Do not run this blender for more than 3 minutes at a time.

•     A rest period of 1 minute is needed for this blender before using again.

•     Do not use more than 1 cup of cubed ice at a time.

BEFORE USING FOR THE FIRST TIME:

1.    Remove all packaging.

2.    Wash all parts: see “CLEANING & CARE” on page 8.

BEFORE PLUGGING IN:

•      Make sure your electricity supply is the same as the 

       electrical rating specified on the underside of the power unit.

•      Make sure to fully assemble your portable blender before

       turning it on or plugging it into a power source.

1.    Place the blender jar on a dry, level, heat-resistant surface.

2.    Attach the blade assembly to the blender jar by turning the blade 

       assembly counter-clockwise until it is attached to the blender jar

       securely.

3.    Place the assembled blade and jar into the blender base by lining

       up the tabs on the blade assembly to the notches inside the 

       blender base.

4.    Turn the blender jar clockwise while holding the blender base 

       securely until it locks into position.  This will make a clicking noise.