Ginnys DK-10, Instruction Manual

   7

INSTALLATION & GROUNDING

 6

10

CLEANING & CARE

Ginnys.com • 1.800.544.1590

 6

    7

BEFORE USING THE FIRST TIME

1.   Read all instructions carefully.

2.   Take the percolator and all accessories out of the packaging carefully.

3.   Clean the percolator with a warm, damp cloth.

Note: Do not immerse the percolator in water or any other liquid.

  HOW TO OPERATE

1.   Add water:

      Take the coffee basket, basket cover and the water

      pipe out, and add cold water into the pot according 

      the number of cups you want. (See cups level

      marked inside the pot).     

Note: Do not use hot water.

          Do not add water beyond the max. cups (10)

          level.          

2.   Add coffee:

      Add proper amount of coffee into the coffee basket, 

      You can adjust the amount, based on your own 

      preferences.

Note: Do not add too much coffee,. The level of coffee

      should be lower than the edge of the coffee

      filter by 1/2”, or the coffee may over flow during 

      heating. Put the basket cover on the coffee basket.

      Fit the water pipe into the bottom of the coffee

      basket, and put them nto the percolator carefully

      until you fit the bottom base of the water pipe into

      the heating cup.

3.   Heating coffee:

      Close the lid and press down to lock it in position. Connect the power

      cord to an outlet. Turn on the power switch to start brewing coffee.

 Note: Do not open the lid when the percolator is heating.

4.   Keep warm coffee:

      When the temperature of the water reachs about 210ºF, it shows that 

      the coffee is brewed. The percolator will switch to keep warm

      automatically. The keep warm indicator light will turn on, and keep

      the coffee inside the pot hot.

5.   After using:

      Unplug the percolator after using.  Allow the percolato to cool before

      cleaning.

NOTE: Clean the internal surface of heating cup after each use.

  CLEANING & CARE

NOTE: DO NOT IMMERSE THE PERCOLATOR, POWER BASE,

                        POWER CORD OR PLUG IN ANY LIQUID.

            ALWAYS UNPLUG THE PERCOLATOR BEFORE CLEANING.

1.    Make sure that the percolator has been switch off and cooled  

       down before cleaning. Always keep the percolator base dry.

2.    Clean the percolator shell with a damp cloth.

3.    Clean the basket cover, coffee basket and water pipe with warm 

       water.

4.    Pour some water into the pot, rinse and clean the inside

       surface and the heating cup gently with a soft brush. 

       Wipe with a dry cloth.