7
INSTALLATION & GROUNDING
6
10
HOW TO OPERATE
Ginnys.com • 1.800.544.1590
6
7
PART NAMES
HOW TO OPERATE...cont’d.
2
3
4
6
5
1
7
1. Cap
2. Lid
3. Glass Jar
4. Gasket
5. Blade Assembly
6. Motor Housing
7. 10-Speed Control Panel
1. Before using the product for the first time, wash all the parts except
the Motor Housing in warm, soapy water, and then rinse and dry
thoroughly.
* Correct cleaning instructions are listed on page 8 under TO CLEAN.
CAUTION: Never immerse the Motor Housing in water or other liquids.
Never use abrasive cleaners on any part of the product.
2 Place the Motor Housing on a flat, stable surface, and then place
the assembled Glass jar in the top of the Motor Housing and turn
counterclockwise until it is firmly in place.
3. Place the Lid with Cap onto the Glass jar.
CAUTION: Do not operate the product until it is properly assembled.
1. Ensure the product is unplugged from the electrical outlet.
2. Pour liquid ingredients into the glass jar.
3. Wash all solid ingredients and cut them into pieces small enough to
fit into the Cap.
CAUTION: The glass jar has a six cup (48 oz. /1.5 liter) capacity.
Do not over-fill it.
CAUTION: Do not use the product for mashing or grinding heavy foods
(e.g., potatoes or meats) or to stir thick mixtures (e.g., dough).
4. After filling the glass jar with ingredients, place the Lid with Cap
securely onto the jar.
5. Plug the product into a standard 110-120 volt AC electrical outlet.
6. Select the desired speed setting.
Press HI or LO to select upper or lower speed selections.
TIP: If the Blades are not operating smoothly, stop the machine and add
some liquid, stir the contents or reduce the contents in the jar.
7. To turn off the product, press the “OFF” Button.
8. Always wait for the blades to completely stop before removing the
glass jar.
9. Lift jar up and away from the main blender base.
10. Remove the cover and pour.