ATTACHMENT OPERATION
Hints
• Use fresh ingredients.
• Don’t cut food too small. Fill the width of the large feed tube.
This prevents the food from slipping sideways during processing.
Alternatively use the small feed tube.
• When using the chopper disc, place ingredients horizontally.
• When slicing or shredding: food placed upright comes out shorter
than food placed horizontally.
• There will always be a small amount of waste on the plate or in the
bowl after processing.
Never put your fingers in the feed tube.
ATTACHMENT OPERATION
CITRUS PRESS
Use the citrus press to squeeze the
juice from citrus fruits (e.g. oranges,
lemons, limes and grapefruits).
HOW TO USE THE CITRUS PRESS
1. Fit the drive shaft and bowl onto the
power unit.
2. Fit the sieve (2) into the bowl -
ensuring the sieve handle is locked into
position directly over the bowl handle.
3. Place the cone (1) over the drive shaft
turning until it drops all the way down.
4. Cut the fruit in half. Then switch on and
press the fruit onto the cone.
5. The citrus press will not operate if the
sieve is not locked correctly.
MILL
Use the mill for milling herbs, nuts and
coffee beans.
1. Blade Unit
2. Sealing Rng
3. Jar
4. Sprinkler Lid
1
2
3
4
HOW TO USE YOUR MILL
1. Put your ingredients into the jar. Fill it
no more than half full.
2. Fit the sealing ring into the blade unit.
3. Turn the blade unit upside down. Lower
it into the jar, blades down.
4. Screw the blade unit onto the jar until it
is finger tight.
5. Fix the mill onto the power unit and turn the mill clockwise to lock on
the base.
6. Switch on to maximum speed or use the pulse control.
7. After milling, you can replace the blade unit with the sprinkler lid and
shake out your food.
8. The sprinkler lid is not airtight.
ATTACHMENT OPERATION
ATTACHMENT OPERATION
12
13
