Gira S1 Windows client
Order No. 2089 00
Page 59
10.3.4. Configuring the Gira DCS-IP gateway
If you want to configure the Gira DCS-IP gateway via remote access, please use the “Activate TCP
remote access connections” option.
Create two connections with the two ports, HTTP (80) and 8080. Enter the IP address of the corre
-
sponding DCS-IP gateway.
Once a remote access connection to Gira S1 has been established, you can call up the DCS-IP gate
-
way assistant by entering the address
http://localhost:80
into the address line of your browser.
10.4. Ending a remote access connection
After successfully using a connection, you can terminate an active connection using the “Disconnect”
button. The connection is also disconnected automatically if the Gira S1 Windows client is closed.