![background image](http://html1.mh-extra.com/html/gira/2089-00/2089-00_configuration_2228998031.webp)
Configuration in the ETS
Order No. 2089 00
Page 31
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
59
SD card memory state Read
1 bit
1.002
CR-T-
Category:
Data logger
Data type:
Boolesch
Function:
Indicates if the SD card memory is exhausted (1 = full).
Description:
1-bit object for display of the occupancy level of the SD card.
When a "1" is assigned to the object, the SD card is full. If it is assigned a "0",
then there is still space for logging on the SD card.
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
60
SD card memory occu
-
pancy
Read
1 byte
5.001
CR-T-
Category:
Data logger
Data type:
Percentage (0..100%)
Function:
Shows how many % of the SD card memory is occupied.
Description:
1-byte object for displaying the memory occupancy of the SD card. The value
range is 0-255 (equivalent to 0-100%).
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
101 - 150
Notification
Write
1 bit
1.001
C-W--
Category:
Switching
Data type:
On/Off
Function:
Sends a notification to the portal server.
Description:
This is one of five possible DP types for the 50 communication objects “101 to
150”. The DP type is specified by selecting the corresponding data in the general
parameters (see chapter 7.5 “Parameters”).
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
101 - 150
Notification
Write
1 byte
5.001
C-W--
Category:
Percent
Data type:
Percent (0 to 100%)
Function:
Sends a notification to the portal server.
Description:
This is one of five possible DP types for the 50 communication objects “101 to
150”. The DP type is specified by selecting the corresponding data in the general
parameters (see chapter 7.5 “Parameters”).
Object
Name
Direction
Data width
DP type
Flags (CRWTU)
101 - 150
Notification
Write
1 byte
5.010
C-W--
Category:
Counter
Data type:
Function:
Sends a notification to the portal server.
Description:
This is one of five possible DP types for the 50 communication objects “101 to
150”. The DP type is specified by selecting the corresponding data in the general
parameters (see chapter 7.5 “Parameters”).