![background image](http://html1.mh-extra.com/html/gira/2089-00/2089-00_configuration_2228998004.webp)
Configuration of the Gira S1 at a glance
Order No. 2089 00
Page 4
1. Configuration of the Gira S1 at a glance
This page displays the configuration process at a glance. You can find more detailed instructions for
start-up in the chapters that are indicated below in the respective steps.
1.1. Installation (see Chapter 6)
• Mount the Gira S1.
• Connect the power supply,
• the KNX connection and
• the network connection.
1.2. Configuration in the ETS (see Chapter 7)
• Create the Gira S1 as a device in the ETS.
• Assign the physical addresses for the Gira S1.
• Assign the required group addresses.
• Transfer the application program and configuration.
1.3. Configuration in the Gira Device portal (see Chapter 9)
• Register the Gira S1.
• Create the users.
• Transfer device ownership, if necessary.
• Optionally, you can set up notifications, for example.
1.4. Configuration of access to the application (see Chapter 9.7)
• First generate the activation codes in the Gira Device portal.
• Then enter the codes in the corresponding input screen of the
relevant application (e.g. Gira X1 app, Gira HomeServer app,
Gira S1 Windows client or Gira Project Assistant).
2089 00
Gira S1
KNX
24 V DC
LAN