Gira smart home app
34
Settings in the system menu
2.4
Occupancy simulation
With occupancy simulation, you record selected building functions that are later
played back automatically. This perfectly simulates the real usage of your build
-
ing, making it look occupied, e.g., when you are on holidays.
2.4.1
Recording simulation
Before you can use the simulation function, the building functions to be played
during your absence have to be recorded for 7 days. For this, please proceed as
follows:
1 Open the [Occupancy simulation] page.
2 Tap [Create new recording].
3 Tap [Select functions] and select the functions to be recorded and played in
the later simulation.
These functions should of course be visible from the outside, e.g., light func
-
tions or moving blinds or shutters if these are not controlled by timers.
4 Confirm the selected functions with [OK].
You can then view the functions again, and change them if necessary.
5 When you have selected all the functions, activate recording by sliding the
[Record] slider switch to the right.
The recording starts and ends automatically after 7 days.
2.4.2
Play simulation
A prerequisite for playing back the occupancy simulation is that you have re
-
corded the functions for 7 days beforehand.
1 Open the [Occupancy simulation] page.
2 Start the occupancy simulation by sliding the [Play simulation] slider switch
to the right.
The occupancy simulation is played until it is deactivated again by the slider
switch.
Fig. 37
Occupancy simula
-
tion
