Gira smart home app
14
User interface
1.4.2.5
Heating mode
In the detail view for the [Heating] function, you can use the [Mode] button to
switch between various operating modes ("Comfort", "Night" etc.) to which dif
-
ferent setpoint temperatures are assigned in the controller.
1 To switch operating mode, tap [Mode].
The operating mode page opens.
2 Select the desired mode and confirm with [OK].
The various modes have the following meanings:
- Comfort
Comfort mode is activated if people are in a room and the room temperature
is to be set to a comfortable value.
- Standby
Activate standby if a room is not used during the day. This adjusts the room
temperature to a standby value, enabling heating or cooling energy to be
saved.
- Night
Activate night mode during night hours or during a long absence. This adjusts
the room temperature to cooler temperatures in heating systems (e.g. in bed
-
rooms). In this case, cooling systems can be set to higher temperature values
when air conditioning is not necessary (e.g. in offices).
- Frost/heat protection
Frost protection is required when, for example, the room temperature is not
to fall below critical values when a window is open. Heat protection may be
necessary when the temperature becomes too high due to external influenc
-
es. In these cases, freezing or overheating of the room can be prevented by
specifying an individual temperature setpoint by activation of the frost/heat
protection, depending on the "Heating" or "Cooling" operating mode.
Fig. 13
Switching operating
mode
