System 3000
Blind timer and timer BT, Operating top unit BT
￭
As soon as the desired ventilation position has been reached, release the buttons and
press the button (3a) within the next 4 seconds.
The ventilation position is saved. The blind/shutter moves back to the upper end position.
If the ventilation position is saved again, the old value is overwritten.
7
Operation of lighting
All settings and operations are also possible via app.
Switching the light
￭
Press button (3a) or (3b) for less than 0.4 seconds.
With a dimming insert, the light switches to the brightness that was last set or a saved
brightness.
Switch light on with minimum brightness
￭
Press the button (3b) for longer than 0.4 seconds.
Adjusting the brightness
￭
Press button (3a) or (3b) for longer than 0.4 seconds.
Setting the colour temperature
Only with DALI Power control unit.
￭
In the switched-on state, press button (3a) or (3b) twice at the top or bottom within 0.4
seconds (double-click). The light switches off and on again.
The device is in colour temperature mode.
￭
Long press button (3a) or (3b) to change the colour temperature.
After a further double click, the device switches back to normal operation and signals this
with a short switching off and on again. After one minute without operation, the device
also returns to normal operation.
Saving the switch-on brightness / colour temperature
￭
Adjusting the brightness
￭
Set colour temperature (only DALI Power control unit)
￭
Press the buttons (3a) and (3b) for longer than 4 seconds.
Switch-on brightness / colour temperature is saved. For confirmation, the light is switched
off briefly and switched on again.
Deleting the switch-on brightness / colour temperature
￭
Press button (3) briefly: Light switches on with the saved switch-on brightness and colour
temperature.
￭
Without changing the brightness, press buttons (3a) and (3b) for longer than 4 seconds.
The switch-on brightness has been deleted.
Switching on takes place at the last brightness / colour temperature value set. For con-
firmation, the light is switched off briefly and switched on again.
8
Activate functions
Activating / deactivating automatic operation (only 2-gang cover)
￭
Press button (4b) briefly.
The automatic mode is activated / deactivated.
When automatic operation is deactivated, the function LED (5) turns orange. Saved trav-
elling times are not executed.
5 / 12
32598122
10868257
06.07.2022
