14
Reset to factory settings – delete all assignments
The fingerprint reader can be reset to the state of deliv
-
ery. In this case, all user and administrator assignments
are lost.
Resetting fingerprint reader:
1. Lay the
administrator finger
on until a short
acknowledgement tone is heard.
✔
The LED briefly lights up green, then flashes orange.
2. Lay the
administrator finger
on until a short
acknowledgement tone is heard.
✔
The LED briefly lights up green, then flashes orange
twice.
3. Lay the
administrator finger
on for 5 s.
✔
During these 5 s brief acknowledgement tones are
heard, the LED simultaneously flashes red.
✔
1 long acknowledgement tone is heard, the LED
lights up green.
✔
The LED flashes green.
The device is now in the state of delivery. All previous
settings have been reset, all user- and administrator
fingers have been deleted.
Admin
Admin
Admin (5 s) = State of delivery
i
Important!
Administrator also deleted
Before reprogramming, an administrator must first be
created (see Seite 6).
