-
Touchscreen, operation via touch directly on the screen, operation via touch directly on the
screen
-
Operating system: Windows Embedded Standard 2009
-
Fitting position horizontal or vertical – depending on application
-
Integrated camera, hideable, e.g. for door communication
-
Integrated loudspeaker
-
Integrated microphone
-
Interfaces - from, behind Design frame: USB, SD memory card
-
Interfaces – accessible from rear: 2x USB, Ethernet, Stereo Audio-In, Stereo Audio-Out,
Video-In
Control 9 KNX:
-
KNX Interface
-
Graphical user interface for visualisation and operation of KNX devices
-
Scenes, forced position, timer, presence simulation and additional functions
i
When connected to an IP-/Ethernet network, additional services are available, e.g. Internet
browser.
i
The KNX user functions remain active even when the device is switched off.
Operating system: Windows Embedded
The operating system is based on Microsoft
®
Windows
®
XP Professional in a memory-optimised
version. All the components required for the device function are preinstalled. Additional drivers
or programs, e.g. Gira software package QuadClient, can be installed at any later time.
4 Operation
Cleaning the touchscreen
The touchscreen requires regular cleaning in order to guarantee the optimum touch sensitivity.
Keep the screen free of foreign bodies and dust. Use a soft, lint-free cloth to clean the screen. If
needed, moisten the cleaning cloth slightly.
i
Do not use sharp cleaning agents, acids or organic solvents.
i
Keep moisture from penetrating into the device. Do not spray the cleaning agent directly
onto the screen surface.
i
Do not use sharp objects for cleaning.
Removing the Design frame
Certain operating elements are only accessible when the Design frame has been removed.
o
Hold the bottom of the Design frame with both hands.
o
Carefully push the Design frame upwards and to the first - upwards and left in the case of
vertical mounting.
o
When the Design frame is loose in the bracket, pull it carefully away from the wall.
Mounting the Design frame
o
Insert the Design frame into the brackets (3) in the right position.
o
Carefully push the Design frame downwards until it engages.
Switching a device on or off
The On/off push-button (6) can be reached when the Design frame (1) has been removed.
o
Switching on: Press the push-button (6).
The panel switches on after about 2 seconds.
The device is started.
o
Switching off: Press the push-button (6) briefly.
- or -
o
Press the "Start" button and select the "Shut Down" command in the Start menu. In the
subsequent list box, select "Shut Down" again and press the "OK" button.
The operating system shuts down and switches off.
82576732
03.06.2016
3/11
KNX
Control 9 Client, Control 9 KNX
