o
Download configuration data with the commissioning software.
- or -
Configuration data is saved on a USB stick or SD card.
o
Insert USB stock or SD card into the appropriate slot – (5) or (11). In the KNX user
interface, select the entry "Commissioning" under "Settings". Select disk drive and path and
open the file with the configuration data.
6 Appendix
6.1 Technical data
Supply
Rated voltage
AC 110 ... 230 V ~
Mains frequency
50 / 60 Hz
Fine-wire fuse
Littelfuse/Wickmann 372 1160 T 1.6 L 250
Standby power
max. 1 W
Power consumption
max. 20 W
Power consumption
max. 8 W (Display off)
Ambient conditions
Ambient temperature
0 ... +35 °C
Storage/transport temperature
-10 ... +70 °C
Relative humidity
15 ... 85 % (No moisture condensation)
Protection class
II
System
Processor type
Intel Atom
TM
Z510
Clock speed
1.1 GHz
L2 cache
512 kB
System chipset
Intel System-Controller Hub US15W
Mass storage
2 GB SSD
RAM
1 GB RAM
Audio controller
Realtek ALC888
Display
Type
TFT 22,9 cm [9"], WVGA
Resolution
800×480 pixels
Number of colours
16,7 millions
Observation angle
± 85 °
Touchscreen
resistive
Camera
Resolution
1,3 million pixels
Connections
Audio output
Line-out, Stereo
Audio input
Line-in, Stereo
Video input
FBAS/CVBS, 1 Vss
Memory card
SDHC, max. 32 GB
USB
USB-Version
1.1/2.0
Connection
3× type A (2× back, 1× front)
Service interface
Connection
Mini-USB, type AB, 5-pole
Network
Type
10/100 MBit/s Ethernet
Connection
RJ45-socket 8/4-pin
Dimensions
Dimensions W×H×D
268×220×65 mm (without design frame)
Dimensions screen W×H
195×118 mm
diagonal
22,9 cm
6.2 Conformity
Data according to EN directive 617/2013
82576732
03.06.2016
9/11
KNX
Control 9 Client, Control 9 KNX
