12
PASSENGER ENTRANCE DOOR
The design of Micro Bird passenger entrance doors and more-view window allow a
maximum visibility of loading zone.
The manual doors are opened and closed using a handle with a thumb lock. To open and
close the main entrance door:
Grab door control handle placing your thumb on the top button.
Pull handle up while rotating the lever toward the passenger entrance door.
To close, simply repeat steps 1 and 2 while rotating away from the passenger entrance
doors.
Adjustment of door leaves: See troubleshooting guide on page 38 of this manual.
The electrical doors are activated by a switch in the console. These are controlled by a
mechanism on top of the entrance door, behind the head pad. The closing or opening of
the doors is determined by two microswitches that will stop the open/close movement.
The microswitch closer to you will be the one that controls the closing of the doors. The
one in the back is controlling the door opening motion.
When closing the doors, always make sure to press on the switch as long as the doors are
in movement to ensure proper tightness with the body of the bus. Same operation applies
when the doors are open. As the switch is momentary, the doors will stop moving as
soon as the switch is released.
