EN
USER’S MANUAL
BR16
54
7. PIECE COUNTING MODE
1.
Press the key
until the symbol
PCS
appears on the screen
2.
Press the key
successively to choose the quantity of pieces of the sample. On the screen will appear, successively, C10/C20/
C50/C100/C200.
3.
Place the sample on the platform, and wait until the sign of stability and press the key
.
4.
Place the product on the platform and the screen will show the number of pieces
.
The accumulation and the sending of data will depend on the mode chosen in the section UF-6.
•
To turn to the normal weighing mode, press the key
•
If the user wants to go back to the piece counting mode, using the same sample of reference, press the key
again.
•
If the user want to change the sample of reference, the user must repeat the steps described above.
8.
PARAMETERS
CONFIGURATION
8.1
INTERNAL COUNTING (A/D)
UF-1
8.2
CONFIGURATION OF THE WEIGHT LIMITS (SUPERIOR AND INFERIOR)
UF-2
8.3
AUTO SWITCH OFF
UF-3
8.4
CONFIGURATION OF THE ILLUMINATION OF THE DISPLAY
UF-4
8.5
HOLD FUNCTION
UF-5
8.6
RS-232 DATA EXIT
UF-6
8.7
CONFIGURATION OF THE SPEED OF THE AD CONVERTER
UF-7
8.8
BLIND
UF-8
8.9
CONFIGURATION OF THE GRAVITY
UF-9
To access the configuration of parameters when the screen is in zero, the user must press at the same time the keys
and
.
Press the key
or
to choose the desired character (UF-1 ~ UF-11).
To go back to the previous mode press the key
.
8.1 INTERNAL COUNTING (A/D) |
UF-1
1. Press the key
to view the internal sums of the scale.
2. To go to the next parameter, press the key
the screen will show the value of the voltage of the battery.
3. To exit this mode and go back to the normal weighing, the user must press the key
or
8.2 CONFIGURATION OF THE LIMITS OF WEIGHT ( SUPERIOR AND INGERIOR) |
UF-2
1. Press the key
to access the parameter.
2. The display will show the message “ 000.00L” ( inferior limit)
3. Use the keys
and
to move the cursor and the key
to choose the desired number..
4. Press the key
to confirm.
Summary of Contents for 260657
Page 2: ...BR16 2 ...
