31
EN
EN
USER MANUAL
BAR
2.2 COMMON SPECIFICATIONS
Display
16'5 mm LCD, with white color LED backlight
Operate temperature
0ºC ~ + 40ºC
ADC
Σ
-Δ
ADC update
≤ 1/10 second
Housing
ABS plastic
Max. Divisions
1/60.000, 1/150.000
Power
AC adapter 12V 500mA
Rechargeable battery (6V/1.2Ah)
Gross weight
2'9 kg with wind protector
2'7 kg with wind protector
3. INSTALLATION
3.1. GENERAL INSTALLATION
The sacles should be sited in a location that will not degrade the accuracy.
Avoid extremes of temperature. Do not place in a direct sunlight or near air conditioning vents..
Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do not place near vibrating machinery.
Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.
Avoid high humidity that might cause condesation. Avoid direct contact with water. Do not spray or immerse the scales in
water.
Avoid air movement such as from fans or opening doors. Do not place near open windows.
Keep the scales clean.
Do not stack material on the scales when they are not in use..
3.2. INSTALLATION OF BAR SERIES
Level the scale by adjusting the four feet. The scale should be adjusted such that the bubble in the spirit level is in the center
of the level and the scale is supported by all four feet. If the scale rocks readjust the feet.
Attach the adapter to the connector on the side of the scale. Please use the power as the label.
For balances with wind shielding, please put wind shielding on the top of balance, just check reading after load weight and
close wind shielding.
