ES /
ES / EN
EN /FR / IT / DE
/FR / IT / DE
SW
7
1. Press
, LCD will show “CAL” first then quantity of sample pieces
placed on the platform. * If the item to be counted is too light, select a
higher quantity to obtain more accurate average.
1. Place the items to be counted on the platform, after a moment the
display will show the count.
1. After turning the power off, uit weight of sample size will be memorized.
To measure the same item, turning the scale on and select “pcs” to start
counting operation; to count a different item, please repeat steps above.
3.2 OVER LOAD
If the weight of objects is over maximum capacity, LCD will show “___”, please remove the
object from the platform and refer to the user manual to operate scale properly.
3.3 LOW BATTERY
Low battery warnings symbol “Lo” will appear on LCD when the battery power is insufficient.
Please replace with new ones to ensure best performance.
3.4 AUTO-OFF FUNCTION
The scale will turn off automatically if not being used for a period of time.
4 CALIBRATION
▪
When the power is off, press and hold
key till LCD shows a value, wait until the value
stabilizes.
▪
Press
key again, LCD reads “
ZERO
” , later LCD will show another value “
xxxx
”.
▪
According to the value shown on LCD (Ex.
5000
), place the same value calibration weight
(5000g) on the platform.
Press
key again, LCD will show “
CAL
” then “
PASS
”.
▪
Remove the calibration weight from the platform and turn off the power.
5 WARRANTY
This scale is warranted against defects of manufacturing and materials for a period of 1 year,
from the delivery date.
During this period, GIROPÈS SL will take charge of repairing the scale.
This warranty does not cover defects or damaged caused by misuse, overloading or improper
installation contrary to the recommendations described in this manual.
This warranty does not cover shipping costs for the reparation of the balance.
