7
Grease Hole
Safety Rules
Read all instructions before using this machine. All operated must
be fully trained in its use and aware of these safety rules.
Also lubricate the tool after performance.
Before operating the tool, pour 20cc suitable motor lubricating oil
into Air Inlet. Run the tool for few seconds to allow air to circulate
the oil and well lubricate the cylinder. This will ensure top
performance and maximum durability of tool.
When starting the sander without pad, it exhausts air too soon to
cool the internal parts and generates hear. Always install pad
when performing the sander. The sander can be performed
without pad when lubricating the cylinder.
Supply tool with 90psi (6.3kg/cm²) of clean and dry air. Higher
pressure raises performance beyond the rated capacity of the
tool will shorten the tool’s life because of faster wear and could
cause injury.
Unscrew L-handle Screw and grease every
week for extending durability of gear.
If the machine appears to malfunction
remove from use immediately and arrange
for service and repair.
Summary of Contents for GPW-7
Page 2: ......
