69
4
47
63
36
10
Disc Wheel Installation
Installation
：
Dovetail and fix the spindle (10) by stop spanner (36), and turn disc spanner (69) in
clockwise direction to tighten the disc nut (4).
Replace
：
Dovetail and fix the spindle (10) by stop spanner (36), turn disc spanner (69) in
counter clockwise direction to loose disc nut (4) to replace the disc wheel (47).
Operation Manual
Check the following items prior to operation.
Working Environment
Make sure that the work site is in order prior to polishing operations.
Air supply Quality
Select and install a compressor with sufficient capacity for the recommended air
consumption.
Use of compressed air with water and oil may cause rusting and
other problems.
Before operating the compressor, drain out the water and oil
completely through the drain port provided at the bottom of the compressor tank.
The Operating Air Pressure
This sander is designed for operation in the optimum air pressure at 90 PSI/6 BARS
(Max. air pressure at 8.0 kgf/cm²).
Excessive air pressure levels can cause the
sander to run at excessively high r.p.m. and may cause harm to the operators.
Only
