W
et Air Cutting Saw
GPW-227 Instruction Manual
GISON
10
PNEUMATIC TOOLS SAFETY INSTRUCTION
The goal of
GISON Machinery Co., Ltd.
is to
produce tools that help you work safely and
efficiently. The most important safety device for
this or any tools is
YOU
, Your care and good
judgment are the best protection against injury, All
possible hazards cannot be covered here, but we
have tried to highlight some of the important ones.
Air Supply and Connection Hazards
Air under pressure can cause severe injury.
Be sure that switch is at "
OFF
" position before
connect with air supply system.
Always shut off air supply, drain hose of air
pressure and disconnect tool from air supply
when not in use, before changing accessories
or when making repairs.
Never direct air at yourself or anyone else.
Whipping hoses can cause serious injury,
always check for damaged or loose hoses and
fittings.
Do not use quick disconnect couplings at tool.
See instruction for correct set-up.
Whenever universal twist couplings are used,
lock pins must be installed.
Do not exceed maximum air pressure of 90
psi/6.2 bar or as stated on tool nameplate.
Projectile Hazards
Always wear impact resistant eye and face
protection when involved with or near the
operation, repair or maintenance of the tools or
changing accessories on the tool.
Be sure all others in the area are wearing
impact-resistant eye and face protection.
Even small projectiles can injure eyes and
cause blindness.
Accessory bursts may be to cause serious
injury.
Entanglement Hazards
Keep away from rotating spindle and
accessory.
Do not wear jewelry or loose clothing.
Scalping can occur if hair is not kept away from
tool and accessories.
Choking can occur if neckwear is not kept away
from tool and accessories.
Operating Hazards
Avoid direct contact with rotating spindle and
accessory to prevent cutting of hands or other
body parts. Wear gloves to help protect
hands.
Do not disable the safety lock off feature on
the throttle lever.
This tool and its accessories must not be
modified.
The liability of manufactory lapses if the user
uses spare parts that are not idential with the
original.
Operators and maintenance personnel must
be physically able to handle the power of the
tool and capable of performing the job task.
Workplace Hazards
Slip/Trip/Fall is a major cause of serious injury
or death. Be aware of excess hose left on the
walking or work surface.
High sound levels can cause permanent
hearing loss. Use hearing protection as
recommended by your employer.
Regarding the dangers to vibration. User
have to obey the Labor Safe operational
instruction that depend on defferent country
rule to setting.
Maintain a balanced body position and secure
footing.
Repetitive work motions, awkward positions
and exposure to vibration can be harmful to
hands and arms, if numbness, tingling pain or
whitening of the skin occurs, stop using tool
and consult a physician.
Avoid inhaling dust or handling debris from
work process that can be harmful your health.
Operators and maintenance personnel must
be physically able to handle the bulk weight
and power of this tool.
This tool is not intended for use in explosive
atmospheres and is not insulated for contact
with electric power sources.
DO NOT DISCARD - GIVE TO USER
