W
et Air Cutting Saw
GPW-227 Instruction Manual
GISON
4
97
96
95
100
99
Base
Blade
43
43 Blade
A aerial view for base
GETTING START
Prepare the First Cutting:
WARNNING
To prevent from any possible injury to the user or damage the workpiece, always keep
the cutting blade away from workpiece before opening the trigger.
Make sure the operators keep in a safety distance from the cutting blade before
feeding the air to the tool.
WARNNING
Always disconnect the air hose adapter before changing the cutting blade, repairing
the tool or when the tool is not in use.
Use personal safety equipment such as goggle, earmuffs, mask & apron in work.
Choose proper cutting blade for different material of the workpiece.
Never use a cutting blade marked with a speed lower than rating speed of tool
Never use a broken or damaged cutting blade.
If the tool drops by accident, check and verify carefully to make sure the tool works
normally before proceeding your work
A. Install Cutting Blade
1. Stop the nut (95) with main shaft wrench (99)
2. Use Allen wrench (100) to loosen fix screw (97) clockwise, then remove spring
washer (96) and nut (95).
3. Take the cutting blade away from the arbor and install a new blade
4. Put back nut (95), spring washer (96) and fasten fix screw (97) counter-clockwise.
5. After installation, turning blade by hand to ensure blade and (36
th
) Water Exit have
been installed properly and matching.
