24
- Remove the tool completely using the control lever
H
Fig. 11a
To avoid damaging the valve and/or the sensor, move it to the “1 o’clock”
position before putting the tool in the channel, operating control lever H.
Start to insert the tool in the tyre and possibly exploit the bead breaking disc, positioning it in the top part, without
forcing the side of the tyre excessively.
NB. If you have difficulty in positioning the tyre on the end of the tool, you need to turn the spindle until it positions
itself correctly.
While turning, make sure the tool does not touch the pressure sensor, if installed.
- Make sure the bead of the tyre is over the extractable tool.
Raise the extractable tool (fig. 11a); if the extractable tool is unable to complete its full stroke, you need to press
the tyre in the position opposite the tool to facilitate the movement and press on the bottom side of the tyre with
the disc positioned in the bottom (fig. 11a/b).
14.2_DEMOUNTING STANDARD TYRES
- Proceed as follows to demount the tyre:
- Turn the spindle until the valve is in the “1 o’clock” position (roughly 10 cm after the tool).
- Position the assembly head over the rim and block it using control button K (ref. 1 fig. 10a/b); this will block
the operating arm and the horizontal arm; the assembly head positions itself automatically at the correct
distance from the rim.
-Press the button in position 2; the arms unlock and the assembly head lowers onto the rim or down to the
minimum service height.
-Press the button in position 3; the arms unlock and the assembly head raises out of the work position
- Press the button in position 1 and the operating arm and the horizontal arm lock. The assembly head posi-
tions itself automatically at the correct distance from the rim.
Fig. 10b
Fig. 10a
Summary of Contents for Crossage
