12
12.0 TYRE DEMOUNTING
Push the locking pedal (ref. 1), and insert the exagonal blocking
device by pressing the button (A) to block the wheel on the Tyre
Changer (fig. 1).
When release the locking pedal (ref. 3), the exagonal blocking de
-
vice blocks the wheel (fig. 2).
fig. 1
fig. 2
Insert the bead breaker disc (ref. 7 fig. 3) into the exagonal blocking
device and lower the disc lever for bead breaking the tyre (fig. 4).
Insert the bead lifting lever (ref. 8 fig. 5) under the bead, over the rim
board and block it in the exagonal blocking device.
fig. 3
fig. 4
fig. 5
Push the roller pedal (ref. 2 fig. 6) to activate the roller bead breaker
and subsequently press the motor pedal (ref. 3) to demount the
wheel.
Repeat the movement (fig. 5) for the second bead.
For remove the wheel, push the roller pedal (ref. 2) and after press
the locking pedal (ref. 3) to remove the exagonal blocking device.
fig. 6
ATTENTION: Deflate the tyre before to start the process