4
1.0 INTRODUCTION
Thank you for purchasing one of our Professional Tyre-Changer designed for demounting and mounting operations on
standard, UHP and “run-flat” tyres.
To prevent accidents or damages to the tyre-changer, use only recommended procedures and accessories.
1.1 Tyre-Changer data:
Please refer to “Tyre-Changer Model” and “Serial Number” data on the Data-Plate (see sample below) to provide our
Technical Service Dept. with the necessary details for prompt assistance and spare-parts tracking.
In case of discrepancies between Tyre-Changer data on Data-Plate and this Manual, please refer to Tyre-Changer data-
plate only.
1.2 Manufacturer data:
Please check the “Declarations of Conformity” at page 2 of this Manual and Tyre-Changer Data-Plate
1.3 Data-plate:
Keep this Manual in good conditions for further references.
Keep all instructions permanently with the unit.
2.0 GENERAL DESCRIPTION
The Tyre-Changer is NOT intended for demounting completely- or partially-inflated tyres, dirty tyres, nor for rim bending
or industrial wheels with split ring rims demounting.
All these operations are forbidden.
This Manual is part of this Tyre-Changer.
Use equipment only as described in this Manual.
Read and understand all instructions before operating this machine.
FAC SIMILE
