USER MANUAL
DIGITAL READOUT VISION 518
MT02_A31_B_VI518_GIVI_ENG rev. A
Pag. 14/32
Turn on the instrument and wait for the end of the self-testing cycle. The display remains lit
up and shows the zero reference (REF) search. Press CLR to enable the axis counting.
Manually move the carriage and evaluate if the axis needs to be inverted (the direction in
which it advances depends on the scale’s installation).
If the axis has to be inverted,
Press
2 2
d i r -
The dash position (-) to the right or left of “dir” does not reflect the movement
direction. The shift from dir- to -dir simply indicates to the operator that the inversion
of direction has been executed.
Press
(because the axis has to be inverted)
- d i r
Press
the selection is confirmed
and the axis is inverted
X
X
X
X
X
X
.
X
X
After having confirmed with the EXE key, the instrument exits programming (the display
shows the position). In case of wrong settings, press the CLR key and repeat the operation
from the beginning.
With function F 23, it is possible to set the load position. The load position is a
predefined
counting value
that can be recalled at any time.
To enter the position (preset), e.g. 50.00, on the axis:
Press
2 3
the instrument requires to
enter the value (position)
X
X
X
X
X
.
X
X
Use
and
to enter the value
0
0
0
0
5
0.
0
Press
to confirm it
5
0
.
0
0
INVERSION OF COUNTING DIRECTION
F 22
LOAD POSITION PRESET
F 23
