USER MANUAL
DIGITAL READOUT VISION 518
MT02_A31_B_VI518_GIVI_ENG rev. A
Pag. 4/32
W A R N I N G !
It is forbidden to switch on the instrument unless the machine on which it
is installed conforms to 2006/42/EC Directive.
All of the equipments connected to the instrument must have insulation
characteristics in compliance with the regulations in force.
The instrument can be installed only by specialized personnel, following
the instructions provided by the Manufacturer.
It is strictly forbidden to intervene on the instrument while it is powered
from the mains power supply or by other devices.
POWER SUPPLY
230 Vac - 50/60 Hz (110 Vac or 24 Vac on request). We recommend
the use of a mains power supply provided with an input filter. The
power distribution network to which the instrument is connected must
be equipped with a sectioning device in compliance with the
regulations in force, positioned close to the instrument.
PREVENTION
To avoid fires or explosions, the instrument should not be used in the
presence of inflammable gases, solvents, explosives, etc.
PANELS
They can be removed only by specialized personnel, after
disconnecting the power supply.
INSTALLATION
The measuring systems (optical scale, rotary encoder, etc.) must be
installed following the instructions provided by the Manufacturer.
CLEANING
The front panel can be cleaned only after disconnecting power supply,
using a moist cloth. The instrument is not protected against liquid
penetration. DO NOT USE SOLVENTS.
MAINTENANCE
Not required.
In case of accidental or momentary mains voltage drops, the instrument does NOT
provide wrong and potentially dangerous information. When switched on again, the
instrument signals the occurred anomaly and requires the zero reference search
(REF).
INSTALLATION
