Connect via Bluetooth
• Make sure that the GIZMO VIBE is fully charged and powered ON (1) and that your
Bluetooth-enable device (phone, tablet, laptop, etc.) is powered too
•
Access the Bluetooth settings on your device (phone, tablet, laptop, etc.) and
enable Bluetooth connections. Search for new Bluetooth devices.
• While your device searches for new Bluetooth connections, GIZMO VIBE will
automatically show up in the list of devices.
• Select and connect to ‘GIZMO VIBE’ from the list of Bluetooth devices on your
audio streaming device. GIZMO VIBE will give a short beep to let you know that it is
connected after successful pairing.
If asked for a password during pairing, enter 0000
• GIZMO VIBE is now ready to play your favourite music.
•
You can adjust the volume with the designated volume controls, either on the
GIZMO VIBE or on your device.
Connect via Cable
• Make sure that the GIZMO VIBE is fully charged and powered ON
•
Connect the supplied audio cable to your audio device and then connect the
cable to the designated audio connector on the GIZMO VIBE
• GIZMO VIBE is now ready to play your favorite music
Charging GIZMO VIBE
Low battery
When GIZMO VIBE’s battery is low, the battery LED (red) will blink every 3 seconds.
GIZMO VIBE will power off automatically 5-10 minutes after the first alert depending on
the playback volume.
Charging
Charge your GIZMO VIBE via the supplied USB charging cable. While GIZMO VIBE
charges the battery LED will light up (RED) until fully charged. A full charge may take
between 2-3 hours. GIZMO VIBE can continue music playback during charging.
Specification
• Bluetooth V3.0 and is backwards compatible with previous versions. Supported
Profile A2DP
• Bluetooth range is approximately 10m / 33 feet (max)
•
Frequency 2.4GHz
•
Battery Lithium-ion Polymer 500mAH
• Battery life, Bluetooth 8-12hrs / Line-in 20-24hrs
Special Notes:
• Please note that the final sound quality of the GIZMO VIBE is limited to the quality
of the input device and quality of the audio itself. Some Bluetooth devices (phone,
tablet, laptop) do not provide high quality audio transmission via Bluetooth. When
you experience more than normal distortion during playback it is advised to change
from Bluetooth connection to wired connection for improved sound quality.
• When switched on GIZMO VIBE will automatically enter pairing mode and try to
reconnect with last connected device. To pair with a different device ensure the
Bluetooth connection on the previous device is turned off.
• When connection is lost due to exceeding the effective range, GIZMO VIBE will
automatically reconnect if your device is back in range within 10 minutes.
•
Each Bluetooth enabled device (phone, tablet, laptop) is different, please consult
your User Guide of your Bluetooth Device for device specific information.
English
8
9
Product Manual
Summary of Contents for Vibe 5XS
Page 1: ...Product Manual...
