5
2
3
1
2
3
CAT 2
N/O
N/C
Adjust the
lateral position
of
the detection field.
Adjust the
tilt angle
of the
detection field with the hex
key.
Lock the position
of the
mounting bracket to avoid
malfunctioning in case of
extreme vibrations.
Unlock the sensor and activate the
visible laser beams.
(Both primary and secondary power cables
must be wired into the power supply)
WIRING
POSITIONING
POWER
POWER SUPPLY -
POWER
POWER SUPPLY -
RELAY 1 - OPTIONAL FIELD
RELAY 2 - SAFETY FIELD
NOT USED
GREEN
BROWN
WHITE
YELLOW
PINK
VIOLET
RED
BLUE
WHITE/RED
WHITE/BLUE
CAUTION!
The distance between the inner curtains of the 2 sensors
must be max. 20 cm.
C1
C2
C3
C4
PRIMARY
(Recommended Power Supply 24 VDC -
GJD’s ALT-100-24 )
SECONDARY
The visible laser beams indicate approximately
the postion of curtain C1 and limit the angle of
the detection field.
The visible laser beams stay activated for 15
minutes or can be turned off the same way they
were activated.
