8
Installation (continued)
9
Installation
WARNING:
Injury may occur if you do not install the top
of the assembly onto the ceiling first.
□
Slip the tapered end of the short tapered tube (D) into the
untapered end of the bottom tube of the assembly.
□
Place the soft vinyl end cap (DD) on the short tapered
tube (D).
□
Lift the entire assembly into position over the shower stall.
□
Compress the top of the unit against the ceiling at the
desired location.
□
Move the bottom end into place on the shower floor so that
the unit is in a vertical position.
8
Preparing assembly for installation
□
Place the tape strips (EE) around the seams of the tubes.
DD
D
bottom shelf assembly
EE